Siderise CVB/C10 Acoustic Cavity Barrier
Stonewool acoustic barriers to reduce floor to floor sound transmission in curtain walling
Acoustic protection for curtain wall façades
CVB/C10 Acoustic Cavity Barrier is a stonewool cavity barrier incorporating a central polymeric mass barrier layer. It is used as a mass line below horizontal firestopping in curtain walls to improve acoustic performance between floors. It is quick and easily to install, and has been designed to accommodate façade movement, unlike traditional mass-barrier materials such as steel or plasterboard.
The Siderise CVB/C10 is a stone wool cavity barrier incorporating a central polymeric mass barrier layer. It is designed for use as a mass line below horizontal firestopping in curtain walls to improve acoustic performance via the critical slab edge void.
Using this acoustic upgrade can offer a significant improvement to the acoustic performance of the firestop. Incorporating mass barriers such as the Siderise CVB/C10 into slab-edge details is often crucial for controlling floor-to-floor sound transmission.
Siderise CVB/C10 is quick and easily to install, and is suitable for use in all curtain walls. The product is thin and flexible, and is designed to accommodate façade movement, unlike traditional mass-barrier materials such as steel or plasterboard.
Benefits
- Reduces floor to floor sound transmission
- Ideal for remedial treatment after installation of fire stops
- Accommodates façade movement
- Quick and easy to install
Siderise CVB/C10 consists of a thin, flexible polymeric mass barrier core offering 10 kg/m2 of surface mass to resist sound transmission. This is surrounded by high density stone wool on both sides. The faces are reinforced with aluminium foil. The entire product is 55 mm thick.
Acoustic considerations
The fire stop between the floor slab and façade represents a point of significant potential weakness in vertical sound transmission between floors.
Our facades technical team can provide guidance around using this acoustic upgrade to meet the project acoustic performance requirements.
As the CVB/C10 is sold as an acoustic upgrade for our CW-FS firestops, we have not tested its standalone performance, however for the purposes of assessment by project acoustic consultants, the Weighted Sound Reduction index (dB Rw) of the mass barrier layer alone is presented below in Table 1.
See acoustic improvement below for the sound reduction index of this product in combination with our other slab edge treatment products.
Additional acoustic performance increases can be achieved by combining the AB10 and CW-FS with the Siderise CVB/C10 cavity barrier. Contact our façades technical team at technical.services@siderise.com for performance guidance or 1/3rd octave test data.
Table 1 Acoustic Performance
| Product Type | Thickness (mm) | Product Surface Mass (kg/m2) | Rw (dB) |
|---|---|---|---|
|
CVB/C10 (mass barrier layer only) |
5.5 |
10.5 |
32 |
Acoustic improvement to the firestop zone
The Siderise AB10 has been developed for use with our Siderise CW range of perimeter barriers and fire stops for curtain walling.
Siderise fire stops already offer a good level of sound insulation performance (typically 22-25 dB Rw). This can be increased to 37 dB Rw by the addition of a Siderise AB10 overlay.
If further performance increases are required, our CVB/C-10 cavity barrier can be used in addition to achieve up to 51 dB Rw.
Table 2: Product Properties
| Properties | Value |
|---|---|
| Form Supplied |
1000 x 1200 sheet |
| Colour |
Silver Face |
| Finish / Metal |
Aluminium foil facing to both sides |
| Thickness (mm) |
55 |
| Central Mass Membrane |
Polymeric barrier |
| Surface Mass |
10.5 kg/m2 |
| Fire Performance |
B-s2-d0 |
The following information is available upon request or via download from the website:
- Safety Data Sheet
- Standard Details
- NBS Specification Clause
For technical advice or support please contact: technical.services@siderise.com
For Installation Training or Site Inspections please contact: site.services@siderise.com
The information in this datasheet is believed to be accurate at the date of publication. Siderise has a policy of continuous product improvement and reserves the right to alter or amend the specifications of products without prior notice. Siderise does not accept responsibility for the consequences of using the products described outside of the recommendations within this datasheet. Expert advice should be sought where there is any doubt about the correct specification or installation of Siderise products.
CVB/C10 Installation Instructions
FAQs
Find answers to some of the most frequently asked questions
They are supplied in 1200 x 1200mm or 1200 x 1000mm sheets, according to grade, for onsite cutting to the required width.
The different grades and thicknesses offer a wide range of sound reduction values. While all grades comprise of high-density resin-bonded rock fibre insulation core with aluminium foil facing both sides, the insulation core is available in different structural forms along with the option of a high-mass central membrane. Please contact the SSPL technical team for assistance in selecting the type of barrier for your project.
The product is designed for easy onsite cutting and installation primarily within ceiling voids, sometimes in floor voids also. You can view fixing recommendations within the installation guidance.
Contact us
We're here to help you
Call for our main switchboard
Email us for technical enquiries
Email us for site support
Complete the form for the right response
Augmented Reality
Point your camera at the QR code. Tap the banner that appears on your screen.