Siderise RH Horizontal Cavity Barrier
Open state barriers designed to allow ventilation whilst offering robust fire protection
Ventilation meets protection
RH Horizontal Cavity Barrier has been developed to meet the complex requirements of ventilated rainscreens. The Lamella stone wool barrier includes an integral strip of intumescent material along the leading edge. It is fixed to the internal face of the wall construction, leaving the cavity open to allow for daily ventilation and drainage. In a fire, the intumescent expands in a matter of minutes until the gap is closed and a robust fire seal is formed, preventing the spread of fire, smoke and heat.
We have developed a range of open-state cavity barriers for different air gap sizes and fire resistance performance requirements — RH25 for air gaps up to 25mm and RH50 for air gaps up to 50mm
RH Horizontal Cavity Barrier has been tested to ASFP TGD19 ‘Fire Resistance Test of Open State Cavity Barriers’ utilising principles of BS EN 1363-1
The performance of RH Horizontal Cavity Barrier has been IFC Certified (IFCC 1712)
RH Horizontal Cavity Barrier has been used in cladding systems assessed under multiple large-scale fire tests, including BS 8414 & NFPA 285
The leading edge is finished with a black film to register as a ‘shadow-line’ behind open joints in the cladding
![](/sites/default/files/styles/2_col/public/2024-06/RH-Product-Landing-Page.png)
Siderise RH ‘Open State’ horizontal cavity barriers have been specifically developed to meet the requirements for cavity barriers used in drained and ventilated façades. Their use ensures that the system will drain any moisture within the façade construction whilst maintaining airflow and, in the event of fire, provide an effective hot smoke and fire seal.
Siderise has developed two ‘Open State’ (open void) horizontal solutions: RH25 for air gaps up to 25mm and RH50 for air gaps up to 50mm.
The product range is compliant with current market requirements and has been tested to ASFP Guidance: ’Open State’ Cavity Barrier used in External Envelope or Fabric of Buildings, utilising principles of EN 1363-1. ASFP Technical Guidance Document –TGD 19 (July 2014 revised Nov 2017) refers.
Third-party Certification
Siderise was the first manufacturer to achieve Third-party certification for Rainscreen Cavity Barriers.
For current details of Siderise certified 'Open State' Cavity Barriers, including the testing and scope of our Third-Party Certification, please refer to IFC Certification IFCC 1712.
This Certificate is available from our online Technical Resources or by contacting our Technical Support department: technical.services@siderise.com
Siderise RH ‘Open State’ horizontal cavity barriers consist of a non-combustible stone wool lamella core, with reinforced aluminium foil faces. This primary seal has a reaction to fire performance to Class 'A1'. The exposed leading edge is also sealed with aluminium foil. Whilst the base material is water repellent and non-hygroscopic, this predominantly enclosed arrangement affords an added degree of weather protection to the core material.
Siderise RH ‘Open State’ horizontal cavity barriers incorporate a continuous high performance reactive intumescent strip which is bonded to the leading edge. The intumescent material has a reaction to fire performance to Class 'E'. In the event of exposure to fire, the intumescent rapidly expands and fully seals the purposely designed ventilation gap formed at the time of installation, between the barrier and the rear of the cladding.
As standard, the range includes a choice of products to suit either 25mm air gaps - referred to as RH25 - or 50mm air gaps - referred to as RH50. Both options are available with either galvanised mild steel (G) or stainless steel (S) fixing brackets as part of the system.
The specific horizontal cavity barrier system is then referred to as either RH25G, RH25S, RH50G or RH50S accordingly. The choice of brackets is usually determined by the rainscreen system designer according to project exposure and/or location.
The leading edge of the horizontal cavity barriers is encapsulated in a weather-resistant polymer film. As standard, the film is black to register as a ‘shadow-line’ behind open joints in the cladding.
For product identification purposes, the top edges of the film used on the RH25 and RH50 cavity barriers are colour-coded and labelled to show the product fire performance rating.
Siderise ’Open State’ horizontal cavity barriers have been tested in accordance with ASFP TGD19 (prEN 1364-6): ’Open State’ Cavity Barrier used in External Envelope or Fabric of Buildings. This test method specifies a procedure for determining the fire resistance of ’open state’ cavity barriers when subjected to the standard fire exposure conditions and performance criteria stipulated in EN 1363 Part 1: 2012.
The tests have been undertaken to assess the ability of the horizontal ’open state’ cavity barrier products to reinstate the fire resistance of a pre-cast, aerated concrete supporting construction. This is the standard assembly for testing such cavity barrier products as it allows the performance of the individual barrier to be classified.
We advise that all ‘RH’ Open State Cavity Barriers are positioned either flush or projecting in front of the thermal insulation.
Product Fire Performance
Siderise RH25 ’Open State’ horizontal cavity barrier for maximum 25mm air gaps
Siderise have tested horizontal cavity barriers with a 25mm air gap to the ASFP TGD19 method. During the fire tests, the seals achieved full effective closure in under 5 minutes. Seal temperatures remained below a 180°C rise during this activation period and maintained the EI requirements for up to E 120 and I 90. See Table 1 for details.
Siderise RH50 ’Open State’ horizontal cavity barrier for maximum 50mm air gaps
Siderise have tested horizontal cavity barriers with a 50mm air gap to the ASFP TGD19 method. During the fire tests, the seals achieved full effective closure in under 5 minutes. Seal temperatures remained below a 180°C rise during this activation period and maintained the EI requirements as detailed in Table 1 for up to E 60 and I 60. See Table 1 for details.
System Fire Performance
Siderise cavity barrier products have been used in a number of large-scale system tests such as BS 8414 (1&2) and NFPA 285. These may be used to evaluate the performance of the Siderise cavity barriers within a complete cladding system. The rules for extended application of results from BS 8414 tests are subsequently defined in BS 9414.
For information regarding performance and assembly details in system tests please see our system tests page.
Table 1: Fire classification performance to TGD 19 (prEN 1364-6)
Product Ref | Colour | Void Range (mm) | Air Gap (mm)** | Integrity (Mins) | Insulation (mins) | Third-party Certification |
---|---|---|---|---|---|---|
RH25-120/90* |
Grey |
0 - 25 |
≤ 25 |
120 |
90 |
IFCC 1712 |
RH50-60/60* |
Blue |
0 - 50 |
≤ 50 |
60 |
60 |
IFCC 1712 |
RH25-90/30 |
Green |
26 - 425 |
≤ 25 |
90 |
30 |
IFCC 1712 |
RH25-60/60 |
Orange |
26 - 425 |
≤ 25 |
60 |
60 |
IFCC 1712 |
RH25-90/60 |
Purple |
26 - 300 |
≤ 25 |
90 |
60 |
IFCC 1712 |
RH25-120/60 |
Yellow |
26 - 425 |
≤ 25 |
120 |
60 |
IFCC 1712 |
RH25-120/90 |
Grey |
26 - 425 |
≤ 25 |
120 |
90 |
IFCC 1712 |
RH50-30/30 |
Red |
51 - 300 |
≤ 50 |
30 |
30 |
IFCC 1712 |
RH50-60/60 |
Blue |
51 - 300 |
≤ 50 |
60 |
60 |
IFCC 1712 |
*Intumescent strip only.
** To allow for on site conditions, RH25 can be used for air gaps of 25 +/-3mm and RH50 can be used for air gaps of 50 +/-5mm.
See IFC Certification IFCC 1712 for further details.
RH open state cavity barriers are generally tested with phenolic insulation used above and below the cavity barrier, with TGD 19 setting out a ranking for insulation products. Stone wool and glass wool insulation are considered less onerous, with PIR, PUR and EPS considered more onerous. The field of application for this standard places limits on the distance between the front face of the insulation and the leading edge of the cavity barrier when combustible insulation is utilised.
Table 2: Bracket fixing requirements and barrier dimensions for RH25 (voids greater than 75mm) and RH50 (voids greater than 100mm)
Product Ref | Void Range (mm) | Air Gap (mm) | Barrier Dimensions T x W (mm) | Length (mm) | Bracket Requirement |
---|---|---|---|---|---|
RH25-90/30 |
76 - 250 |
25 |
75 x Void -25 |
1200 |
3no RS 350 G/S |
251 - 350 |
25 |
75 x Void -25 |
1200 |
3no RS 450 G/S |
|
351 - 425 |
25 |
75 x Void -25 |
1200 |
3no RS 550 G/S |
|
RH25-60/60 |
76 - 250 |
25 |
90 x Void -25 |
1200 |
3no RS 350 G/S |
251 - 350 |
25 |
90 x Void -25 |
1200 |
3no RS 450 G/S |
|
351 - 425 |
25 |
90 x Void -25 |
1200 |
3no RS 550 G/S |
|
RH25-90/60 |
76 - 250 |
25 |
90 x Void -25 |
1200 |
3no RS 350 G/S |
251 - 300 |
25 |
90 x Void -25 |
1200 |
3no RS 450 G/S |
|
RH25-120/60 |
76 - 250 |
25 |
120 x Void -25 |
1200 |
3no RS 350 G/S |
251 - 350 |
25 |
120 x Void -25 |
1200 |
3no RS 450 G/S |
|
351 - 425 |
25 |
120 x Void -25 |
1200 |
3no RS 550 G/S |
|
RH25-120/90 |
76 - 250 |
25 |
120 x Void -25 |
1200 |
3no RS 350 G/S |
251 - 350 |
25 |
120 x Void -25 |
1200 |
3no RS 450 G/S |
|
351 - 425 |
25 |
120 x Void -25 |
1200 |
3no RS 550 G/S |
|
RH50-30/30 |
101 - 250 |
50 |
75 x Void -50 |
1200 |
3no RS 350 G/S |
251 - 300 |
50 |
75 x Void -50 |
1200 |
3no RS 450 G/S |
|
RH50-60/60 |
101 - 250 |
50 |
90 x Void -50 |
1200 |
3no RS 350 G/S |
251 - 300 |
50 |
90 x Void -50 |
1200 |
3no RS 450 G/S |
Please note:
- 'T' refers to barrier thickness. 'W' refers to barrier width.
- Brackets are available in two forms: (G) denotes galvanised steel brackets and (S) denotes stainless steel brackets.
- Brackets must be installed at 400mm centres based on a 1200mm strip. For lengths ≤800mm 2no brackets must be used, with spacing reduced pro-rata. Lengths <100mm should be avoided by cutting down the adjacent barrier accordingly.
- All brackets are to be suitably fixed to the substrate with non-combustible fixings.
- All brackets to penetrate product at mid-thickness. The protruding split ends should be trimmed to 10-20mm and counterfolded to retain the product. For RH50-60/60, the split end facing down will need to be trimmed to 20mm to ensure overlap with the intumescent.
- Please refer to separate installation instructions.
Table 3: Screw fixing requirements and barrier dimensions RH25 (voids up to 75mm) and RH50 (voids up to 100mm)
Product Ref. | Void Width (mm) | Air Gap (mm) | Barrier Dimensions T x W (mm) | Length (mm) | Fixing Requirement |
---|---|---|---|---|---|
RH25-120/90* |
0-25 |
≤ 25 |
75 x 1.5 |
1200 |
3no Screws |
RH50-60/60* |
0-50 |
≤ 50 |
35 x 3 |
1200 |
3no Screws |
RH25-90/30 |
26-30 |
≤15 |
75 x 15 |
1200 |
3no Screws |
RH25-90/30 |
31-35 |
≤20 |
75 x 15 |
1200 |
3no Screws |
RH25-90/30 |
36-40 |
≤ 25 |
75 x 15 |
1200 |
3no Screws |
RH25-90/30 |
41-45 |
≤ 25 |
75 x 20 |
1200 |
3no Screws |
RH25-90/30 |
46-75 |
25 |
75 x Void -25 |
1200 |
3no Screws |
RH25-60/60 |
26-30 |
≤15 |
90 x 15 |
1200 |
3no Screws |
RH25-60/60 |
31-35 |
≤20 |
90 x 15 |
1200 |
3no Screws |
RH25-60/60 |
36-40 |
≤ 25 |
90 x 15 |
1200 |
3no Screws |
RH25-60/60 |
41-45 |
≤ 25 |
90 x 20 |
1200 |
3no Screws |
RH25-60/60 |
46-75 |
25 |
90 x Void -25 |
1200 |
3no Screws |
RH25-90/60 |
26-30 |
≤15 |
90 x 15 |
1200 |
3no Screws |
RH25-90/60 |
31-35 |
≤20 |
90 x 15 |
1200 |
3no Screws |
RH25-90/60 |
36-40 |
≤ 25 |
90 x 15 |
1200 |
3no Screws |
RH25-90/60 |
41-45 |
≤ 25 |
90 x 20 |
1200 |
3no Screws |
RH25-90/60 |
46-75 |
25 |
90 x Void -25 |
1200 |
3no Screws |
RH25-120/60 |
26-30 |
≤15 |
120 x 15 |
1200 |
3no Screws |
RH25-120/60 |
31-35 |
≤20 |
120 x 15 |
1200 |
3no Screws |
RH25-120/60 |
36-40 |
≤ 25 |
120 x 15 |
1200 |
3no Screws |
RH25-120/60 |
41-45 |
≤ 25 |
120 x 20 |
1200 |
3no Screws |
RH25-120/60 |
46-75 |
25 |
120 x Void -25 |
1200 |
3no Screws |
RH25-120/90 |
26-30 |
≤15 |
120 x 15 |
1200 |
3no Screws |
RH25-120/90 |
31-35 |
≤20 |
120 x 15 |
1200 |
3no Screws |
RH25-120/90 |
36-40 |
≤ 25 |
120 x 15 |
1200 |
3no Screws |
RH25-120/90 |
41-45 |
≤ 25 |
120 x 20 |
1200 |
3no Screws |
RH25-120/90 |
46-75 |
25 |
120 x Void -25 |
1200 |
3no Screws |
RH50-30/30 |
51-55 |
≤40 |
75 x 15 |
1200 |
3no Screws |
RH50-30/30 |
56-60 |
≤45 |
75 x 15 |
1200 |
3no Screws |
RH50-30/30 |
61-65 |
≤ 50 |
75 x 15 |
1200 |
3no Screws |
RH50-30/30 |
66-70 |
≤ 50 |
75 x 20 |
1200 |
3no Screws |
RH50-30/30 |
71-100 |
50 |
75 x Void -50 |
1200 |
3no Screws |
RH50-60/60 |
51-55 |
≤40 |
90 x 15 |
1200 |
3no Screws |
RH50-60/60 |
56-60 |
≤45 |
90 x 15 |
1200 |
3no Screws |
RH50-60/60 |
61-65 |
≤ 50 |
90 x 15 |
1200 |
3no Screws |
RH50-60/60 |
66-70 |
≤ 50 |
90 x 20 |
1200 |
3no Screws |
RH50-60/60 |
71-100 |
50 |
90 x Void -50 |
1200 |
3no Screws |
*Intumescent strip only.
- Screw fixings must be installed at 400mm centres based on a 1200mm strip. For lengths ≤800mm 2no screw fixings must be used, with spacing reduced pro-rata. Lengths <100mm should be avoided by cutting down the adjacent barrier accordingly.
- All barriers to be suitably fixed to substrate with non-combustible fixings and washers with a 10-15mm (max.) head diameter.
- For RH25 all screw fixings to penetrate product at mid-thickness. For RH50 all screw fixings to penetrate the top edge of the RH50 intumescent.
- Please refer to separate installation instructions
Thermal conductivity: λ= 0.038 W/m.K (tested foil to foil)
Siderise RH ‘Open State’ horizontal cavity barriers
Table 4: Technical Specification
Properties | Value |
---|---|
Form Supplied |
1200mm long. Supplied pre-cut in width to suit advised void size reduced by the ventilation gap required. |
Product Finish |
Aluminium foil tape to top and bottom surfaces |
Appearance |
Black leading edge with coloured tapes to indicate performance |
Weight |
Precut strips with stone wool from 0.5kg to 4.8kg dependent on grade of product and void width. Intumescent strip only product 0.2kg |
Thermal Conductivity |
λ = 0.038 W/m.K (tested foil to foil) |
Reaction to Fire |
The primary stonewool seal is Classified 'A1' to EN 13501-1 The reactive intumescent along the leading edge is Class 'E' to EN 13501-1. This is permitted by Regulation 7(3)(f) - Approved Document B for England & Wales. |
Resistance to Fire |
For product fire performance see Tables 1, 2 and 3 |
Siderise RH 'Open State' horizontal cavity barriers have an Environmental Product Declaration (HUB-0824) in accordance with EN 15804+A2 & ISO 14025 / ISO 21930. Please see Product Resources or EPD Hub for further information.
The stone wool core is recyclable.
The following information is available upon request or via download from the website:
- NBS Specification Clause
- Standard Details
- Installation Instructions
- Safety Data Sheet
- Third-party Certification
Technical Services Team: technical.services@siderise.com
Site Services Support
Siderise offers a range of services to contractors and installers. These include toolbox product installation and site installation inspection and reporting (subject to availability and by agreement).
Site Services Team: site.services@siderise.com
The information in this datasheet is believed to be accurate at the date of publication. Siderise has a policy of continuous product improvement and reserves the right to alter or amend the specifications of products without prior notice. Siderise does not accept responsibility for the consequences of using the products described outside of the recommendations within this datasheet. Expert advice should be sought where there is any doubt about the correct specification or installation of Siderise products.
![NBS Logo](/sites/default/files/2024-06/nbs-dark.png)
![Bimstore Logo](/sites/default/files/2024-06/bimstore-dark.png)
![](/index.php/sites/default/files/styles/2_col/public/2024-06/Fire_safety_resources_how_to_video_siderise_1600px.png)
Installation
View our installation video
Test data
View our testing data and see how we can help you go beyond on your next façade project
![](/index.php/sites/default/files/styles/2_col/public/2024-06/Test-Data-Image-3.jpg)
FAQs
Get quick answers to common queries or contact our team for more advice. Your questions answered.
Yes, our site services engineers combine classroom learning with toolbox training and includes mock-up benchmark installations, free-of-charge.
Yes, brackets are available in two forms: galvanised steel brackets (G) and denotes stainless steel brackets (S)
RH Horizontal Cavity Barrier is available for voids up to 425mm with various fire resistance options, depending on requirements. Please see the Technical Datasheet for full breakdown of available void widths
Contact us
We're here to help you
Call for our main switchboard
Email us for technical enquiries
Email us for site support
Complete the form for the right response
Augmented Reality
![](/sites/default/files/styles/full/public/2024-07/RS-002_AR.png)
Point your camera at the QR code. Tap the banner that appears on your screen.