Siderise RS Series Fixing Bracket Pre-drilled
Pre-drilled supporting bracket with a split end for use in the installation of Siderise RH Rainscreen Horizontal Open State Cavity Barrier. Available in a range of lengths to suit the required void size, and in stainless steel and galvanised steel variants to suit project specific requirements.
IMPORTANT NOTE - Pre-drilled brackets will be phased in throughout the remainder of 2024, with our current bracket offering expecting to be fully phased out by early 2025.
Developed specifically for Siderise Rainscreen OSCBs
Siderise RS Series Fixing Bracket provides secure and positive full penetration, mechanical retention for our RH Rainscreen Horizontal Open State Cavity Barriers, and is a requirement as part of the tested and third-party certified systems. With a 25mm width, RS series brackets are supplied in a range of lengths with three drill holes for fixing position versatility. The 7mm pre-drilled holes are designed to help facilitate a faster and simpler installation compared to brackets that require on-site drilling. In addition, the fixed length of the split end eliminates the need to cut to size onsite, while the notch feature aims to make the bending process easier.
For application specific information, see technical datasheet, installation instructions and standard details on the RH Rainscreen Horizontal Open State Cavity Barrier product page. https://www.siderise.com/fire-safety/cladding/rh/cavity-barriers-ventilated-cladding-rainscreen-horizontal
Siderise RS Series brackets are designed for quick and easy installation of specified Siderise products to supported system interfaces. RS series brackets are currently supplied for installation with Siderise open-state cavity barrier products such as RH & EWI. Please refer to each individual product technical datasheet and installation instructions to ascertain the correct bracket specification for the application and void dimensions on your project.
Table1: Bracket Dimensions
| Product Ref. | Length(mm) | Width (mm) | Thickness Galv(mm) | Thickness SS(mm) |
|---|---|---|---|---|
| RS350 | 355 | 25 | 1.0 | 0.9 |
| RS450 | 450 | 25 | 1.5 | 1.5 |
| RS550 | 550 | 25 | 1.5 | 1.5 |
Please note: Length of bracket provided is measured in flat form from tip to tip.
Table 2: Pre -Galvanised Mild Steel Properties
| Properties | Value |
|---|---|
| Description | Pre-Galvanised Mild Steel Brackets |
| Grade | DX51-D |
| Coating Weight | Z275 Zinc (Min Av triple spot coating mas g/m2) |
| General Characteristics | Hot Dip Galvanised giving sacrificial protection to all areas after forming and fabrication |
| Dimensional Tolerances | General: ±1.00mm |±2.0º |
Table 3: Stainless Steel Grade 304 Bracket Properties
| Properties | Value |
|---|---|
| Description | Stainless Steel Brackets |
| Grade | 304 |
| General Characteristics | Widely used stainless chromium-nickel steels. General purpose grades with good resistance to atmospheric corrosion and many organic and inorganic chemicals |
| Dimensional Tolerances | General: ±1.00mm |±2.0º |
Note: Stainless steel 316 grade available subject to minimum order quantity. Please contact our customer service team: customer.service@siderise.com for more information.
For technical advice or support please contact: technical.services@siderise.com
For Installation Training or Site Inspections please contact: site.services@siderise.com
For technical advice or support in the Middle East, India or Asia Pacific contact: smetech@siderise.com
The information in this datasheet is believed to be accurate at the date of publication. Siderise has a policy of continuous product improvement and reserves the right to alter or amend the specifications of products without prior notice. Siderise does not accept responsibility for the consequences of using the products described outside of the recommendations within this datasheet. Expert advice should be sought where there is any doubt about the correct specification or installation of Siderise products.
Augmented Reality
Point your camera at the QR code. Tap the banner that appears on your screen.